Dan Dugan Sound Design Dugan-VN16 - Manual (Page 42)

Dugan-VN16 User Guide
42
Software Configuration for a Specific IP Address
This section explains to users with IT expertise how to set a specific IP address for any
Dugan unit on the network.
1. Launch Dugan-Utility-yyyymmdd.jar.
Figure 3-7 Dugan Utility
2. Wait a minute and if the list pane is blank, click Refresh List.
If the list pane remains blank, skip back to Manually Add Unit above.
If the list pane displays Dugan units, continue.
3. Click on the first unit in the list so it is highlighted.
The Network Parameters section displays information about that unit.
4. If Use DHCP is selected, deselect it.
5. Enter the desired IP address into the IP Address field.
6. Click Send New Params to Unit.
The Dugan-VN16 will reboot.