Dan Dugan Sound Design Dugan-VN16 - Manual (Page 28)

Dugan-VN16 User Guide
28
Mix Rack
This section explains how to perform each of the following tasks required to install
a Dugan-VN16 card into a Mix Rack:
• Prepare the Mix Rack
Shut down, disconnect cables, remove front and back face plates.
• Install the Dugan-VN16 Card
Install new brackets, install the Dugan-VN16 card, connect cables.
• Complete and confirm installation
Power up Mix Rack and verify installation.
To prepare the Mix Rack to install the Dugan-VN16:
1. Shut down the console, and turn off power to the Mix Rack.
2. Disconnect all cables from Mix Rack.
3. Remove the Mix Rack’s front panel cover by unscrewing its mounting screws (#1
Phillips).
Figure 2-28 Mix Rack front panel
4. On Mix Rack’s back panel, identify each input/output slot (A–E).
Mounting screws (remove all)