Dan Dugan Sound Design Dugan-VN16 User Manual
Page 20
Dugan-VN16 User Guide
20
NOTE:
If you have to twist the cables to orient them correctly to connect to the Dugan-VN16
card, or the connectors do not line up properly, you are attempting to connect the cables
to the wrong ports.
7. Inside the console, locate an available power cable. An available power cable is lo-
cated in a cable bundle running along the right-inside wall of the console. Power
cables have yellow, brown, black, and red wires attached to a white connector.
8. Cut the cable tie that holds the power cable in the bundle, making sure not to cut
any wires. Free the power cable from the bundle.
9. Rebundle the other cables and secure with them with the included cable tie.
10.Connect the power cable to the socket on the Dugan-VN16 card.
When the power cable is correctly connected, the yellow wire should be the first
wire on the left. Check to make sure the cable is connected securely.
Figure 2-15 Connecting an available power cable to the Dugan-VN16 card
11.Secure the Dugan-VN16 card to the back of the console using the four screws you
removed earlier.