Dan Dugan Sound Design Dugan-VN16 - Manual (Page 15)

Dugan-VN16 User Guide Installation
15
5. To lock the Top Panel in the vertical position, tighten the two interior captive
thumbscrews located on the top left and top right sides of the console.
Figure 2-4 Tightening the top left captive thumbscrew
To remove the output card in slot D:
1. On the back panel of the SC48, locate the output card in slot D.
Figure 2-5 Left side of the SC48 back panel
2. Inside the console, locate the output option card and loosen the two captive
thumbscrews that secure the card to the console chassis.
Figure 2-6 Loosening the output card captive thumbscrew
output card in slot D