Dan Dugan Sound Design Dugan-VN16 - Manual (Page 31)

Dugan-VN16 User Guide Installation
31
4. Attach an included ribbon cable to the left-most connector on the Dugan-VN16
card (J6). Attach the other end to the right-most connector on the FOH IO card.
5. Attach the right Dugan-VN16 connector (J5) to the left FOH IO connector (see Fig-
ure 2-32).
Figure 2-32 Dugan-VN16 ribbon cables connected to FOH IO card
6. From the back of the Mix Rack, locate an available power cable (or use the included
power cable splitter) to attach the power cable to the Dugan-VN16 power socket
(see Figure 2-33).
Figure 2-33 Power connector
J6 J5