Dan Dugan Sound Design Dugan-VN16 - Manual (Page 4)

Precautions
Failure to observe the following warnings may lead to fatality or serious injury from
fire or electric shock.
1. Before installing the card, you must refer to the owner’s manual of the host device
or to the Avid website to verify that your host device supports this card, and to
verify the number of cards that can be installed in combination with other Avid
or third-party cards.Avid website: http://www.avid.com/
2. If one or more cards in a combination not endorsed by Avid are installed in an Avid
device, electrical shock, fire, or malfunction may occur. Please note that the Dugan-
VN16 can be used with the following models of Avid products that accept option
I/O cards: FOH Rack, Mix Rack, and SC48.
3. Do not attempt to disassemble or modify the card. Do not apply excessive force
to board connectors or other board components. Mishandling the board may
lead to shock, fire hazard, or equipment failure.
4. To eliminate shock hazard, disconnect the power cable from the main unit before
installing this card.
CAUTION: Failure to observe the following precautions may lead to personal injury, or may result in
damage to equipment or other property.
5. Do not touch the board’s metallic leads (pins) when handling the card. Pins are
sharp and may cause hand cuts.
6. The card is electrostatic-sensitive. Before handling the card, you should briefly
touch the main unit’s metal casing with your bare hand to drain any static charge
from your body.
CAUTION: Dan Dugan Sound Design assumes no responsibility for data loss, equipment damage, or
injury caused by inappropriate handling or usage.