CIRCUTOR CIRLAMP Series - Manual (Page 72)

4�6�14� CirLAMP MANAGER MENU: UPDATE
This screen, Figure 77 , is used to update the CirLAMP firmware.
Figure 77:Update�
The system must be restarted before updating.
To perform the update, select the file and click on the Send button.
To complete the update the CirLAMP will restart.
The update file has the extension “.tar”.
NB: Do not decompress the file.
4�6�15� CirLAMP MANAGER MENU: MODEM UPDATE
This screen, Figure 78 , is used to update the firmware for the PLC module.
Figure 78: Modem Update�
The system must be restarted before updating.
To perform the update, select the file and click on the Send button.
To complete the update the CirLAMP will restart.
The update file has the extension “.tar”.
NB: Do not decompress the file.
4�6�16� CirLAMP MANAGER MENU: REBOOT
This screen, Figure 79 , allows you to restart the CirLAMP via the web site.
Figure 79:reboot
Do not disconnect the unit from the auxiliary power supply while it is restarting.
72
CirLAMP system
Instruction Manual