CIRCUTOR CIRLAMP Series - Manual (Page 63)

4�6�11� CirLAMP MANAGER MENU: GEOLOCATION
From this screen you can geolocate the CirLAMP Manager, Figure 71 :
Figure 71:Geolocation�
To do this, the latitude and longitude coordinates must be entered manually. Next, click on the
Send manual geolocation manual button.
Once geolocation has been completed, daylight hours will be calculated:
 Sunrise: time at which the sun comes up.
 Sunset: time at which the sun goes down.
To calculate sunrise and sunset, the time zone corresponding to the coordinates selected must
be previously configured. ( “4.6.10.11. Time configuration”)
The values for daylight hours are those used on the Inputs and Outputs screen ( “4.6.9. CirLAMP
MANAGER MENU: INPUTS AND OUTPUTS” ).
Figure 71 also shows the CirLAMP positioning map. If the nodes have been positioned, these
will also be displayed.
63 Instruction Manual
CirLAMP system