CIRCUTOR CIRLAMP Series - Manual (Page 62)

4�6�10�9� Other parameters
Figure 68:Configuration of other parameters.
On this screen you can configure the following parameters:
 name: Identification name of the CirLAMP.
 reportFormat: Format of the files: Normal or Compressed.
 viewNode: Enables the display of the nodes on the web site map. If the display is
activated the Reference, Latitude and Longitude fields are displayed in the table of
units.
4.6.10.10. Send parameters file (E01)
Figure 69:Send the parameters file (E01).
All of the CirLAMP parameters can also be modified by sending the parameters file (E01).
The parameters file E01 is in “.xml” format ( “4.6.4.1. E01-L01, Configuration of parameters” ).
4.6.10.11. Time configuration
Figure 70: Time configuration.
On this screen you can configure the following parameters:
 Fh: Date and time.
 timeZone: Time zone.
62
CirLAMP system
Instruction Manual