CIRCUTOR CIRLAMP Series - Manual (Page 32)

Attribute Description
TimeSendReq
Maximum time for sending a report. If the report read time is higher
than indicated, a report containing the information collected to date
will be sent and it will continue to read the information until it is com-
plete. (seconds)
TimeDisconMeter
If the time of the last communication exceeds the time indicated by
this variable, the unit will change from active to inactive. (seconds)
RetryDisconMeter
Number of retries to communicate with the nodes connected to the
CirLAMP Manager network.
TimeRetryInterval Time between reattempts to communicate with the units.
ReportFormat Indicates the format of the reports: compressed (1), normal (0).
ValuesCheckDelay Number of seconds delay to execute an order.
MaxOrderOutdate
Maximum time to initiate an order, i.e., if an order is programmed
with an initiate execution time higher than this value, the order will
be aborted. (seconds)
TimeDelayRestart
Wait time before continuing with tasks after starting the unit. (sec-
onds)
NTPMaxDeviation
The unit will generate an event when the deviation in seconds, be-
tween the NTP and the unit, is greater than that indicated.
AccInacTimeout Period of inactivity before the WEB session ends. (minutes)
AccSimulMax Maximum number of simultaneous users on the WEB.
PrimaryDns Primary DNS IP address.
SecondaryDns Secondary DNS IP address.
PathReports Directory for uploading the file to the FTP.
TimeZone
Time zone:
0 : Barcelona, 1: London, 2: Athens, 3: Argentina, 4: Brazil
5 : Colombia, 6: Central America.
mailHost Mail server.
mailUser Mail user.
mailPassword Mail password.
mainMail Address from which mail is sent.
destinationMail Address to which mail is sent.
hourIni Start time for communication with the tasks.
hourEnd End time for communication with the tasks.
activeFilterTime
The filter for the tasks communication time is enabled (Y) or disa-
bled (N).
latitude CirLAMP Manager latitude.
longitude CirLAMP Manager longitude.
viewNodes
Indicates whether you want to view the CirLAMP Nodes on the
map or not.
32
CirLAMP system
Instruction Manual