CIRCUTOR CIRLAMP Series - Manual (Page 19)

4�6�2�1 CirLAMP Manager information area�
Figure 11: CirLAMP Manager information area�
This area of the main screen shows all the information relating to CirLAMP Manager:
 Identifier: The unit identifier is displayed (Example: CIR0000000001).
 Name: Name given to the CirLAMP Manager. (Example:CirLamp Manager)
 PLC version: PLC modem version.
 Connected: Number of units connected/units detected.
 Version: Firmware version of the CirLAMP Manager�
4�6�2�2 Menu
The CirLAMP Nodes and CirLAMP Manager screens can be accessed from the menu. The
unit status can also be viewed.
4�6�2�2�1� Menu: Nodes
Figure 12: Node selection menu�
The following screens can be accessed via the Nodes menu:
 Equipments table: Accesses the table of nodes logged in the
CirLAMP Manager� (“4.6.3. NODES MENU: EQUIPMENTS TABLE”)
 Orders: ( “4�6�4� NODES MENU: ORDERS” )
Read access user: Cannot access the Orders screen.
 Node map: Access the nodes map with the units connected at that instant.
( “4.6.5. NODES MENU: NODE MAP” )
 Node update: Update nodes screen. ( “4.6.6. NODES MENU: NODE UPDATE” )
 Intruder list: Allows you to add the nodes that you do not wish to connect to CirLAMP
Manager to a list using the serial number of each node.
( “4.6.7. NODES MENU: INTRUDER LIST” )
Read access user: Cannot access the Intrusion list screen.
19 Instruction Manual
CirLAMP system