CIRCUTOR CIRLAMP Series - Manual (Page 26)

4�6�3�1�3� Scheduling time intervals in hours
If the CirLAMP Manager has the input and output module ( M8I8O Expansion module) the
work intervals can be programmed automatically from Sunrise (Sunrise time).
Figure 20:Screen for scheduling time intervals in hours�
The parameters are:
 Cnt: Node identifier.
 inTime: Interval 1 activation time. This parameter cannot be modified; it coincides
with the Sunrise value (Sunrise time).
 power1: Power value in % during interval 1.
 firstTime: Interval 2 activation time.
 power2: Power value in % during interval 2.
 secondTime: Interval 3 activation time.
 power3: Power value in % during interval 3.
 thirdTime: Interval 4 activation time.
 power4: Power value in % during interval 4. Interval 4 will last until the node has
no power supply.
Click on the Send button to send the data to the unit.
Read access user: The programming of intervals in hours cannot be modified.
26
CirLAMP system
Instruction Manual