Delta Electronics Ethernet Communication Module IFD9507 - Manual (Page 61)

Ethernet Communication Module IFD9507
DVP-PLC Application Manual 59
„ Once the setup is successful, you can see the virtual COM you set in the Device Manger.
2. Using Virtual COM in Delta VFDSoft
„ Open Delta VFDSoft.
„ Setting up communication format (COM Setup)
Enter the virtual COM (COM2) set in the previous steps to “Com Port” column. Next, enter the
communication format of VFD-E (38400, 7, E, 1) and press “Test" button. Once the “Success” light is
ON, the communication test is regarded successful.