beautypg.com

Ethernet communication module ifd9507 – Delta Electronics Ethernet Communication Module IFD9507 User Manual

Page 31

background image

Ethernet Communication Module IFD9507

DVP-PLC Application Manual

29

1. Enable IP filter function:

Check the box to enable IP filter.

2. IP

address:

IP addresses that are allowed to establish connections. Maximum 8 IPs are allowed.

3. Netmask:

Subnet mask of the IP that is allowed to establish a connection. To see whether the subnet mask is

allowed, conduct bitwise AND operation between the allowed IP and subnet mask and destination IP

and subnet mask. If the two values obtained are the same, the subnet mask is allowed by the network.

For example, assume the IP is 192.168.0.1 and subnet mask 255.255.255.255, the only IP allowed to

establish a connection will be 192.168.0.1. If the subnet mask is 255.255.255.0, the IPs allowed to

establish connections will become 192.168.0.0 ~ 192.168.0.255.

10.7 Ethernet/IP settings

Ethernet/IP parameters are used for a connection.

„

Setting Ethernet/IP parameters