Delta Electronics Ethernet Communication Module IFD9507 - Manual (Page 33)

Ethernet Communication Module IFD9507
DVP-PLC Application Manual 31
※ Max. Timeout tick: 255
3. Trigger
There are three trigger types. The cyclic used to describe event that repeat in regular. Production
occurs when a change of state is detected by application object. The Application object used to
provide the run time exchange of messages across network.
4. OÆT RPI
Originator to target requested packet interval.
When the trigger occurs, the packet is sent to the target within the set interval time.
5. TÆO RPI
Target to originator requested packet interval.
When the trigger occurs, the packet is sent to the source within the set interval time.
6. In Instance
Target input buffer Instance. Range: 1 ~ 65,535.
7. In Size
Target input buffer size. Range: 0 ~ 256.
8. Out Instance
Target output buffer instance. Range: 1 ~ 65,535.
9. Out Size
Target output buffer size. Range: 0 ~ 256.
10. Width
Data width
11. Config Instance
Configuration instance. Range: 1 ~ 65,535.
10.8 User Defined Settings
When you set up user-defined communication protocol for IFD9507, please set up the following parameters.
„ Setting up communication parameter between RS-232/RS-485 serial master and serial slave