Altera Cyclone IV GX FPGA Development Board - Manual (Page 9)

May 2013 Altera Corporation Cyclone IV GX FPGA Development Board
Reference Manual
2. Board Components
Introduction
This chapter introduces the major components on the Cyclone IV GX FPGA
development board.
Figure 2–1 illustrates major component locations and Table 2–1
provides a brief description of all component features of the board.
1 A complete set of schematics, a physical layout database, and GERBER files for the
development board reside in the Cyclone IV GX FPGA development kit documents
directory.
f For information about powering up the board and installing the demonstration
software, refer to the
Cyclone IV GX FPGA Development Kit User Guide .
This chapter consists of the following sections:
■ “Board Overview”
■ “Featured Device: Cyclone IV GX Device” on page 2–5
■ “MAX II CPLD EPM2210 System Controller” on page 2–7
■ “Configuration, Status, and Setup Elements” on page 2–12
■ “Clock Circuitry” on page 2–20
■ “General User Input/Output” on page 2–21
■ “Components and Transceiver Interfaces” on page 2–26
■ “Memory” on page 2–38
■ “Power Supply” on page 2–46
■ “Statement of China-RoHS Compliance” on page 2–49