Altera Transceiver Signal Integrity Development Kit, Stratix IV GT Edition - Manual (Page 11)

November 2011 Altera Corporation Transceiver Signal Integrity Development Kit,
Stratix IV GT Edition Reference Manual
2. Board Components
Introduction
This chapter introduces all the important components on the Stratix IV GT transceiver
signal integrity development board.
Figure 2–1 illustrates major component locations
and Table 2–1 provides a brief description of all features of the board.
1
A complete set of schematics, a physical layout database, and GERBER files for the
development board reside in the Stratix IV GT transceiver signal integrity
development kit installation directory.
f
For information about powering up the board and installing the development kit
software, refer to the
Transceiver Signal Integrity Development Kit, Stratix IV GT Edition
User Guide .
This chapter consists of the following sections:
■ “Board Overview”
■ “Featured Device: Stratix IV GT Device” on page 2–5
■ “Configuration, Status, and Setup Elements” on page 2–9
■ “General User Input/Output” on page 2–16
■ “Flash Memory Device” on page 2–18
■ “Components and Interfaces” on page 2–20
■ “Power” on page 2–25