Pilz PMCprimo DriveP.12/AA0/4/0/0/208-480VAC - Manual (Page 29)

9 Project window
9.1.9 Electronic Gearing
External Gearing Source [ GEARMODE ]
The servo amplifier can be controlled through different interfaces and from various sources.
Ratio [ GEARO ] / [ GEARI ]
You can use the entry fields in this equation to determine the transmission ratio.
Input Filter [ GEARFILT ] – PMCtendo DD5 and PMCprotego D only
This command GEARFILT can be used to configure the filter and determine the corresponding
frequency of the electronic gearing filter.
Count Direction [ DIR ] – PMCtendo DD5 and PMCprotego D only
The DIR variable defines the count direction for feedback information.
Lines per Revolution [ ENCIN ] – PMCtendo DD4 only
ENCIN sets the resolution (number of pulses) of the encoder input channel using a digital
encoder as feedback unit.
User Manual for Setup Software PDrive Page 29