Pilz PMCprimo DriveP.12/AA0/4/0/0/208-480VAC - Manual (Page 24)

9 Project window
Current Advance [ MTANGLP ] – not for Induction Motor
A current-dependent phase advance, to make use of the reluctance torque for motors with
magnets embedded in the rotor.
Limit Phi [ MVANGLF ] – not for Induction Motor
Velocity-dependent Lead (Limit Phi).
Start Phi [ MVANGLB ] – not for Induction Motor
Velocity-dependent Lead (Start Phi).
Rated Speed [ MVR ] – Induction Motor only
In asynchronous motor mode, the parameter MVR must be set to the rated speed of the motor.
This is the threshold for the start of field attenuation.
Rotor Time Constant [ MTR ] – Induction Motor only
Defines the rotor time constant under rated load (Tr = Lh/Rr). Lh is die magnetizing inductance
and Rr is the rotor resistance.
Field Level [ MIMR ] – Induction Motor only
Magnetizing Current (Induction Motor).
KP [ GF ] – Induction Motor only
Proportional gain (P) of the flux controller. The flux controller is implemented as a PI controller.
TN [ GFTN ] – Induction Motor only
Reset (I) time of the flux controller.
Field Correct Factor [ MCFW ] – Induction Motor only
Correction factor for field-weakening.
The correction factor compensates for non-linearity of the motor inductance with reducing
magnetizing current by increasing speed during field-weakening.
Slip Correct Factor [ MCTR ] – Induction Motor only
Correction factor for the rotor (armature) time constant, increases the torque in the field-
weakening range /stationary range.
Rated Frequency [ MFR ] – PMCtendo DD5 and PMCprotego D with asynchronous motor only
Rated frequency of the asynchronous motor.
Rated Voltage [ MUR ] – PMCtendo DD5 and PMCprotego D with asynchronous motor only
Rated voltage of the asynchronous motor.
Initial Voltage Factor [ VSTART ] – PMCtendo DD5 and PMCprotego D with async. motor only
Initial voltage as a fraction of the rated voltage.
Power Factor [ MCOSPHI ] – PMCtendo DD5 and PMCprotego D with async. motor only
Power factor of the asynchronous motor.
Page 24 User Manual for Setup Software PDrive