Pilz PMCprimo DriveP.12/AA0/4/0/0/208-480VAC - Manual (Page 2)

1 General Information
1 General Information
1.1 Copyright
Copyright 2010 Pilz GmbH & Co. KG
All rights reserved. The implementation of technical changes which improve the performance of
the product is subject to change without prior notification! The product or parts of the content
may be reproduced or transmitted in any form (by printing, photocopying, microfilm or any other
method) or stored, processed, copied or distributed by electronic means without the written
permission of Pilz GmbH & Co. KG.
1.2 Notice
Pilz GmbH & Co. KG reserves the right to make amendments to this document at any time.
The examples given serve only as illustrations. No guarantee is given for their suitability in
particular applications. Although the utmost care has been taken in the production of this
document, no liability can be accepted for any mistakes that it may contain. We welcome any
suggestions for the improvement of our products, or documentation.
We reserve the right to make technical changes, which lead to the improvement of the product!
1.3 Previously published editions
Version Notes
12/2001 Initial version: valid from software version version 2.01
V1-16-07-2002 Revised version: valid from software version 2.03
V2-20-11-2002 Revised version: valid from software version 2.04
V3-10-06-2003 Revised version: valid from software version 2.05
V4-11-05-2004 Revised version: valid from software version 2.06
V5-24-02-2005 Revised version: valid from software version 2.07
V6-23-08-2005 Revised version: valid from software version 2.08
V7-16-11-2005 Revision
V8-03-05-2006 Revised version: valid from software version 3.0
V9-12-10-2007 Revised version: valid from software version 3.1
V10-18-01-2008 Revised version: valid from software version 3.2
Page 2 User Manual for Setup Software PDrive