Pilz PSSu E S 2AI U - Manual (Page 10)

Safety
Operating Manual PSSu E S 2AI U(­T)
21405­EN­03 10
3 Safety
3.1 Intended use
The module may be used for standard applications in system environment A and B.
The module provides analogue inputs. It may be used as an input module for standard
functions.
The modules PSSu E S 2AI U and PSSu E S 2AI U­T may be used as a safety component
in accordance with the Lifts Directive 95/16/EC, EN 81­1, EN 81­2 and EN 115­1.
The programmable safety system should be installed in a protected environment that meets
at least the requirements of pollution degree 2. Example: Protected inside space or control
cabinet with protection class IP54 and corresponding air conditioning.
The module PSSu E S 2AI U­T is suitable for use where there are increased environmental
requirements (see Technical Details).
Intended use includes making the electrical installation EMC­compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
} Any component, technical or electrical modification to the module
} Use of the module outside the areas described in this manual
} Any use of the module that is not in accordance with the technical details.
INFORMATION
The module is supported by
} PSSuniversal Configurator and PSSuniversal Assistant from Version
1.4.0
} PAS4000 from Version ?
– We recommend that you always use the latest version (download
from www.pilz.de).
The PSSu E S 2AI U module may be used in conjunction with the following base modules:
} PSSu BP 1/8S
} PSSu BP 1/8C
} PSSu BP 1/12S
} PSSu BP 1/12C
} PSSu BP­C 1/8S
} PSSu BP­C 1/8C
} PSSu BP­C 1/12S
} PSSu BP­C 1/12C