Selector switch for setting the station address, 4function description, 2 canopen – Pilz PSSu H CAN User Manual
Page 18: 3 selector switch for setting the station address
4.2
CANopen
4
Function description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-4
4.2.3
Selector switch for setting the station address
Selector switch for setting the station address
4-
][Funktionsbeschreibung_BA_Zusatz CAN Station
The station address of a PSSu (“Node ID”) is set via the “ADDRESS” DIP
switches (“1”, “2”, “4”, “8”, “16”, “32” and “64”). The DIP switches are
binary coded. Permitted station addresses are in the range 0
D
... 127
D
.
A station address is set via a combination of the relevant binary coded
switches:
“ADDRESS” DIP switch
Key
Example
Switch designation
OFF
ON
Station address 116
D
S2
Transmission rate
S1
64
0
64
D
32
0
32
D
16
0
16
D
8
0
8
D
4
0
4
D
2
0
2
D
1
0
1
D
INFORMATION
The station address should only be set when the module is
switched off (no voltage applied).
The settings are only transferred when booting. Any changes
made to the settings during operation will not be transferred.
Each station address on a CANopen network must be unique.
ADDRESS
OFF ON
S2
S1
32
16
8
4
2
1
BAUD
64