Pilz PNOZ mmc6p CAN - Manual (Page 9)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2-1
2.1 Unit structure
2 Overview
2 2000 Overview Overview 2- 2.1 Unit structure 2100 Unit structure 2- 2.1.1 Scope of delivery
Scope of delivery 2- Lieferumfang_Brck_779260_modul_mini_BA  Expansion modulePNOZ mmc6p
 Jumper 779 260
2.1.2 Unit features
Unit features 2- Gerätemerkmale_Verwendung
Using the product PNOZ mmc6p:
Verwendung/Bildunterschrift_multi_mini_Modul
Expansion module for connection to a base unit from the configurable
control system PNOZmulti Mini
Geraetemerkmale_Zusatz BA Einleitung
The product has the following features:
Gertemerkmale_Feldbus_CANopen  Can be configured in the PNOZmulti Configurator
 Connection for CANopen
 Station addresses from 0 ... 99, selected via rotary switch
 Status indicators for communication with CANopen and for errors
Gertemerkmale_Feldbusmodule allg  24 virtual inputs and 24 virtual outputs on the PNOZmulti control sys-
tem can be defined in the PNOZmulti Configurator for communication
with the fieldbus CANopen. The number of inputs and outputs can be
extended to 128. Please note that when the extended inputs and out-
puts 24 - 127 are used they have different properties (see document
entitled "Communication Interfaces").
 Max. 1 PNOZ mmc6p can be connected to the base unit
Gertemerkmale_Anschlussklemmen_Zubehoer  Plug-in connection terminals:
either spring-loaded terminal or screw terminal available as an acces-
sory (see order reference)
Gerätemerkmal_multi_Mini_Modul_Anschluss_Basis  Please refer to the document "PNOZmulti System Expansion" for de-
tails of the base units PNOZmulti Mini that can be connected.