Pilz PNOZ mmc6p CAN - Manual (Page 11)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
3 3000 Safety Safety 3- 3.1 Intended use 3100 Intended use 3- Bestimmung/Gertebeschreibung_multi_Feldbus_CANopen_mini
The expansion module PNOZ mmc6p is used for communication be-
tween the configurable control system PNOZmulti Mini and CANopen.
CANopen is designed for fast data exchange at field level. The expan-
sion module PNOZ mmc6p is a passive CANopen subscriber (Slave).
The basic communication functions with CANopen conform to the
guidelines of the CANopen User Group CiA DS-301 V4.2.0. The central
controller (master) reads input information from the slaves and writes
output information to the slaves as part of each cycle. As well as the cy-
clical transfer of usable data, the expansion module PNOZ mmc6p can
also be used for diagnostic and commissioning functions. Data traffic is
monitored on the Master/Slave side.
Bestimmung/Gertebeschreibung_multi_Zusatz_Modul_Mini
The expansion module may only be connected to a base unit PNOZmulti
Mini from the configurable control system PNOZmulti (please refer to the
document "PNOZmulti System Expansion" for details of the base units
PNOZmulti Mini that can be connected).
Bestimmung/Gertebeschreibung_multi_System
The configurable control system PNOZmulti is used for the safety-relat-
ed interruption of safety circuits and is designed for use in:
 E-STOP equipment
 Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
Bestimmung/Gertebeschreibung_multi_ nicht sicherheitsgerichtete Funkt
The expansion module may not be used for safety-related functions.
Bestimmung/Gertebeschreibung_EMV+Ausschluss
Intended use includes making the electrical installation EMC-compliant.
The product is designed for use in an industrial environment. It is not
suitable for use in a domestic environment, as this can lead to interfer-
ence.
The following is deemed improper use in particular:
 Any component, technical or electrical modification to the product
 Use of the product outside the areas described in this manual
 Use of the product outside the technical details (see chapter entitled
“Technical Details”)
3.1.1 System requirements
System requirements 3- Systemvoraussetzungen - Verweis auf Produktänderungen
Please refer to the "Product Modifications" document in the "Version
overview" section for details of which versions of the base unit and
PNOZmulti Configurator can be used for this product.