Turning Technologies TurningPoint User Manual
Page 126
TurningPoint for Office 2003 User Guide
126
Response Device Management
c
Press Channel.
3
Click Tools on the TurningPoint Toolbar and select Settings.
4
Select Response Device from the panel on the left.
5
Under the PresenterCard section, select [None].
The PresenterCard Pairing Window opens.
PresenterCard Pairing Window
6
Press a button on the PresenterCard other than the Channel button.
The Detected Device ID appears in the window.
7
Click Pair.
8
Optionally, you can customize the programmable buttons by selecting the desired function from the
drop-down menus provided for each button.
9
Click Done to close the Settings Window.
Note
If you change the channel on the device receiver,
the PresenterCard will need to be paired again.