Cli operation and setup, Ssl security, Vii. advanced operation – SurgeX SX-AX20 User Manual
Page 28: Continued)
SX-AX15 (20) User Manual
Page 27
VII. Advanced Operation
(continued)
CLI Operation and Setup
To view the status of any of the AutoPing channels, issue the get autoping <1
‐16> command.
Axess > get autoping 1
IP Address: 192.168.1.7
Action: Cycle
Frequency: 30
Count: 3
Outlet: Cabinet_1
‐ Firewall
Status: OK
OK
Axess >
To configure the AutoPing, use the following commands:
set autoping <1
‐16> ipaddress
set autoping <1
‐16> action
set autoping <1
‐16> frequency <1‐999>
set autoping <1
‐16> count <1‐99>
set autoping <1
‐16> device
set autoping <1
‐16> group
SSL Security
The Axess can provide Secure Socket Layer (SSL) encryption on the web interface. Enable this
feature using the set web ssl yes command from the Telnet / Serial interface. When SSL is
enabled, the Axess must be accessed by specifying https:// in the URL.
SSL Example: https://192.168.0.254