SurgeX SX-AX20 - Manual (Page 15)

SX-AX15 (20) User Manual Page 14
VI. Command Line Interface (CLI) Protocol
The Command Line Interface provides complete setup of all functions of the Axess. The CLI may be accessed either via the network
interface using Telnet, or via the serial port or modem (for models with internal modem option) using a terminal emulator program.
Some commands of the CLI require administrative rights; these are indicated in the following tables.
Outlet Commands
Command Description Admin Fact Def
get outlets Returns the status of ALL the outlets the user has rights to.
Displays all devices and outlets in a cluster configuration.
No
get outlet <1 ‐8> Returns the status of the selected outlet. The user must have
rights to the selected outlet. No
set outlet <1 ‐8> Sets the selected outlet to the selected state. The user must
have rights to the selected outlet. This command is for units not
used in a cluster configuration. If used in a cluster, it is the
same as device #1. No
get device <#1 ‐#16 | devname> outlet <1‐8> Returns the status of the selected outlet on the selected Axess.
Device is either the number of the device <#1 to #16> or the
name of the device, as set. Number sign (#) required. The user
must have rights to the selected outlet. No
set device <#1 ‐#16 | devname> outlet <1‐8> Sets the selected outlet on the selected Axess to the selected
state. The user must have rights to the selected outlet.
No
set device <#1 ‐#16 | devname> outlet <1‐8> name Sets the name of the selected outlet of the selected Axess. 20
characters max. Yes Outlet <#>
get device <#1 ‐#16 | devname> outlet <1‐8> initial.state Get or set the initial state of the selected outlet of the currently
selected Axess. Initial state is the condition of the outlet when
the Axess is powered up.
Yes Last
set device <#1 ‐#16 | devname> outlet <1‐8> initial.state