Autoping commands, Email commands, Vi. command line interface (cli) protocol – SurgeX SX-AX20 User Manual
Page 22: Continued)
Page 21
SX-AX15 (20) User Manual
VI. Command Line Interface (CLI) Protocol
(continued)
AutoPing Commands
Command
Description
Admin
Fact Def
get autoping <1
‐16>
Returns the settings and state of the selected autoping.
Yes
set autoping <1
‐16> ipaddress
Set the IP address of the selected autoping in dotted
decimal.
Yes
0.0.0.0
set autoping <1
‐16> action
Set the action of the selected autoping. On-Follow, On-
Latch, Off-Follow, Off-Latch, Cycle, Cycle-Once, or None.
Yes
None
set autoping <1
‐16> frequency <1‐999>
Set the frequency of the selected autoping in seconds.
Yes
10
set autoping <1
‐16> count <1‐99>
Set the number of failures the selected autoping requires
before it triggers its action.
Yes
3
set autoping <1
‐16> device
Assign an autoping to either a device/outlet or group.
Each autoping can be assigned to one or the other.
Yes
set autoping <1
‐16> group
Yes
Email Commands
Command
Description
Admin
Fact Def
set email enable
Enables or disables the email reporting system.
Yes
No
get email
Returns the current settings of the email client of the root Axess.
Yes
set email server
Set the IP address of an SMTP or ESMTP server.
Yes
0.0.0.0
set email address
Set the return address of the root Axess email client.
Yes
0.0.0.0
set email username
Set the user name for the mail server.
Yes
0.0.0.0
set email password
Set the password for the mail server.
Yes
0.0.0.0
set email retry <1
‐999>
Set the number of retries for failed email reporting.
Yes
3
send test mail
Send a test email to the selected user.
Yes