SurgeX SX-AX20 - Manual (Page 21)

Page 20
SX-AX15 (20) User Manual
VI. Command Line Interface (CLI) Protocol (continued)
Web Server Commands
Command
Description Admin Fact Def
get web Returns the current web server settings of the root Axess. Yes
set web enable Enable or disable the root Axess web server. Yes Yes
set web port <1 ‐65535> Set the root Axess web server’s port. Web standard port is 80. If
changed, access the Axess using http://xxx.xxx.xxx.xxx:
SurgeX recommends changing the web port on all Axess units that
are accessible from the internet. Yes 80
set web ssl Enable or disable the root Axess web server’s SSL capabilities. Yes No
Telnet Commands
Command
Description Admin Fact Def
get telnet Returns the current telnet server settings of the root Axess. Yes
set telnet enable Enable or disable the root Axess telnet server. Yes Yes
set telnet port <1 ‐65535> Set the port of the root Axess telnet server.
SurgeX recommends changing the telnet port on all Axess units that
are accessible from the internet.
Yes 23