SurgeX SX-AX20 - Manual (Page 24)

Page 23
SX-AX15 (20) User Manual
VI. Command Line Interface (CLI) Protocol (continued)
Time Commands
Command
Description Admin Fact Def
get time Returns the current time and NTS settings. Yes
set time server Sets the address of an NTS server for the root Axess to query. Yes 129.6.15.29
set time usents Enables or disables the ability of the root Axess to connect to an NTS. Yes Yes
set time zone < ‐12 to 12> Sets the time zone of the root Axess. Yes -5
set time hour <0 ‐23> Sets the hour of the root Axess RTC. Only valid if NTS is disabled.
Yes
set time minute <0 ‐59> Sets the minute of the root Axess RTC. Only valid if NTS is disabled.
Yes
set time day <1 ‐31> Sets the day of the root Axess RTC. Only valid if NTS is disabled.
Yes
set time month <1 ‐12> Sets the month of the root Axess RTC. Only valid if NTS is disabled. Yes
set time year <2006 ‐20047> Sets the year of the root Axess RTC. Only valid if NTS is disabled. Yes
SNMP Commands
Command
Description Admin Fact Def
get snmp Returns the current SNMP settings. Yes
set snmp writecommunity Sets the SNMP Write Community name. 32 Characters max. Yes Private
set snmp readcommunity Sets the SNMP Read Community name. 32 Characters max. Yes Public
set snmp ipaddress Sets the IP Address of SNMP manager n, where n = 1-4. Yes 0.0.0.0
set snmp enable Enables or disables SNMP manager n, where n = 1-4. Yes No
Firmware Upload Commands
Command
Description Admin Fact Def
get upload enable
Get or set the ability for the root Axess to accept a firmware upload.
Yes
set upload enable Yes No