Spectrum Controls 140 ACI 052 00sc - Manual (Page 49)

Chapter 6
APPLICATION NOTES
6.1 General Application Tips
The following is a list of do’s and don’ts that should be observed in your
applications.
• Select the appropriate 140 ACI 052 00sc from the I/O map selection screen.
• Configure the module using the zoom screen selections and make appropriate
use of Configuration and Status registers as outlined in Chapter 2 through
4.
• Ensure correct units of measure are selected for data type.
• Use the lowest filter frequency setting possible for your application, this
ensures the most stable and accurate readings.
• Configure the 4x Register.
• Check that the Green Ready LED is lit when the module is powered up and
has completed its self test.
• Check that the Green Active LED is lit when data is being transferred to
the Quantum CPU.
43
Installation Instructions
32-Channel Analog Input Module
Quantum 140 ACI 052 00sc