Spectrum Controls 140 ACI 052 00sc User Manual
Page 38
3x+8 Configuration Error: Bit 10
An illegal configuration was attempted. When this occurs configuration will
not be accepted by the module and this flag will be set. By using 4x register
bits 1 and 2 to set the module to status individual channels flags can be
checked to determine which channel or group is incorrect.
3x+8 Data Input Mode: Bits 11, 12
The module continuously outputs a group of eight registers worth of data.
The data for a given group can be paged between three modes. These are
the standard channel input data, channel status data or Time stamp data.
Bit 11
Bit 12
Input Modes
0
0
Data
0
1
Status
1
0
Time Stamp
3x+8 Group Select: Bits 13-16
These four bits are used to indicate which group of channels you have chosen
in the 4x configuration word.
Bit 13 Bit 14 Bit 15 Bit 16
Group
0
0
0
0
Channels 1-8
0
0
0
1
Channels 9-16
0
0
1
0
Channels 17-24
0
0
1
1
Channels 25-32
32
Installation Instructions
32-Channel Analog Input Module
Quantum Series 140 ACI 052 00sc