Pitney Bowes DP50S Color Printer User Manual
Page 179

4
Message List
181
Message
Problem and solutions
sap enable, saptype=
sapname=
The SAP function has started. The SAP packet
isissued to advertise the service on the SAP
table onthe NetWare server.
session_IPv4
The requested community name is not defined.
session_IPv6
The requested community name is not defined.
session_ipx
The requested community name is not defined.
Set context to
An NDS context name has been set.
shutdown signal received. network servicere-
booting...
The smbd service has started.
Smbd start. (NetBIOS)
SMBD (ServerMessageBlockDaemon) has
beenstarted.
SMTPC: failed to connect smtp server.
Connection to the SMTP server failed. This
could bebecause no connection to the network
has beenestablished, or the network configura-
tion isincorrect, so there is no response from
the SMTPserver, or the specified SMTP server
name isincorrect, or the specified SMTP server
IP addresscould not be found in the DNS server,
or a serverother than the SMTP server has been
specified, orthe specified SMTP server port
number is incorrect.
Check the DNS Server’s IP address and
SMTPserver’s IP address, or the SMTP server
name and
SMTP port number, or the SMTP server’s SMTP
portnumber, or the network connection andcon-
figuration.
SMTPC: failed to connect smtp server. timeout.
Connection to the SMTP server failed due
totimeout. This could be because the specified
SMTPserver name is incorrect, or no connec-
tion to thenetwork has been established, or the
networkconfiguration is incorrect, so there is
no responsefrom the SMTP server. Check the
SMTP servername, or the network connection
andconfiguration.