Etherauth, Help – Pitney Bowes DP50S Color Printer User Manual
Page 145

4
Remote Maintenance by telnet
You can configure the Ethernet interface or wireless LAN interface.
View settings
The following command displays the current domain name:
msh> domainname
Interface domain configuration
msh> domainname “interface_name”
Setting the domain name
msh> domainname “interface_name” name “domain name”
• A domain name can be entered using up to 63 alphanumeric characters.
• The Ethernet interface and wireless LAN interface will have the same domain name.
• wlan can be specified only when the wireless LAN interface unit is installed.
Deleting the domain name
msh> domainname “interface_name” clear “name”
etherauth
Use “Ethernet” command to display or modify the authentication related parameters for Ethernet.
View settings
msh> etherauth
802.1x Configuration
msh> etherauth 8021x {on|off}
{on} means “active” and {off} means “inactive”.
help
Use the “help” command to display the available command list and the procedures for using those
commands.
Command list display
msh> help
147
Interface
Interface set
ether
Ethernet interface
wlan
Wireless LAN interface