Status, Syslog – Pitney Bowes DP50S Color Printer User Manual
Page 163

4
SSH/SFTP communication timeout setting
msh> ssh timeout {0-65535}
The default is 300.
SSH/SFTP communication login timeout setting
msh> ssh logintimeout {0-65535}
The default is 300.
Setting an open key for SSH/SFTP
msh> ssh genkey {512|768|1024} “character string”
Create an open key for SSH/SFTP communication.
Usable characters are ASCII 0x20-0x7e (32 bytes) other than “0”.
The default key length is 1024, and the character string is blank.
Deleting open key for ssh/sftp communication
msh> ssh delkey
• If you do not specify a character string, current setting is displayed.
status
Use the “status” command to display the printer status.
Messages
msh> status
• For details, see “Getting Printer Information over the Network”.
syslog
Remote Maintenance by telnet
Use the “syslog” command to display the information stored in the printer’s system log.
View message
msh> syslog
• For details about the information displayed, see “Message List”.
165