Pitney Bowes DP50S Color Printer - Manual (Page 175)

4
Message List
177
Message Problem and solutions
add_sess_IPv6: community name>already defined. The same community name already exists. Use-
another community name.
add_sess_IPX: bad trap
addr:community name>
The IPX address (00:00:00:00:00:00) isunavail-
able when the community access type is
TRAP. Specify the host IPX address for the
TRAPdestination.
add_sess_IPX: community name>already defined. The same community name already exists. Use-
another community name.
adjust time server offset:XX sec. ncsd tells you the timing of the NTP server and-
whether or not the time system clock is set.
Attach FileServer = Connection to the file server as the nearest
serverhas been established.
Attach to print queue (In the print server mode) Attached to the print-
queue.
btd is disabled. Communication via Bluetooth is unavailablebe-
cause btd is disabled in the security mode.
Enable the btd in the security mode.
centrod is disabled. Communication via parallel connectionsunavail-
able because centrod is disabled in thesecurity
mode.
Enable centrod in the security mode.
child process exec error! (process name) The network service failed to start. Turn the print-
eroff and then on. If this does not work, contact
yourservice or sales representative.
Connected DHCPv 6 server (IPv 6 address)
The IP address was successfully received from
the
DHCPv 6 server.
connection from A user logged in from the host .
Could not attach to FileServer (In the remote printer mode) Connection to the
fileserver has not been established. The file
server hasrefused the connection. Check the file
serverconfiguration.