Pitney Bowes DP50S Color Printer - Manual (Page 168)

4
4. Monitoring and Configuring the Printer
170
Parameter Value configured
eap {tls|ttls|leap|peap} {chap|mschap|mschap
v2|pap|md5|tls}
You can specify the EAP authentication type.
tls: EAP-TLS (default)ttls: EAP-TTLSleap:
LEAPpeap: PEAPchap, mschap, mschapv2,
pap, md5, or tls aresettings for the phase 2
method, and must be setwhen using EAP-
TTLS or PEAP.
Do not make these settings when using other
EAPauthentication types.
If you select EAP-TTLS, you can select
chap,mschap, mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2
ortls.
username “character string” You can specify the login user name for the
Radius server.
Usable characters: ASCII 0x20-0x7e(31 bytes)
other than “@”. The default is blank.
username2 “character string”
You can specify the phase 2 username for
EAP-
TTLS/PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31 bytes)
other than “@”. The default is blank.
domain “character string” You can specify the login domain name for the
Radius server.
Usable characters: ASCII0x20-0x7e (31 bytes)
other than “@”. The default is blank.
password “character string” You can specify the login password for the
Radius server.
Usable characters: ASCII 0x20-
0x7e(128bytes). The default is blank.
srvcert {on | off} You can set the server certificate. The default
is”off”.