Pitney Bowes DP50S Color Printer - Manual (Page 148)

4
4. Monitoring and Configuring the Printer
• For details about displayed contents, see “Getting Printer Information over the Network”.
ipsec
Use the “ipsec” command to view and configure IPsec settings.
Viewing settings
The following command displays the current IPsec settings:
msh> ipsec
• For details about displayed contents, see Security Guide.
ipp
Use the “ipp” command to view and configure IPP settings.
Viewing settings
The following command displays the current IPP settings:
msh> ipp
IPP timeout configuration
Specify how many seconds the computer waits before canceling an interrupted print job. The time
can be entered between 30 to 65535 seconds.
msh> ipp timeout [30 - 65535]
IPP user authorization configuration
Use IPP user authorization to restrict users to print with IPP. The default is “off”.
msh> ipp auth {basic|digest|off}
• User authorization settings are “basic” and “digest”.
• Use “off” to remove a user’s authorization.
• If user authorization is specified, register a user name. You can register up to 10 users.
IPP user configuration
Configure IPP users according to the following messages:
msh> ipp user
The following message appears:
msh> Input user number (1 to 10): Enter the num-
ber, user name, and password.
150