Devicename, Dhcp – Pitney Bowes DP50S Color Printer User Manual
Page 141

4
msh> btconfig
Mode settings
You can set the Bluetooth operation mode to {private} or {public}.
msh> btconfig {private|public}
• The default is {public}.
devicename
Use the “devicename” command to display and change the printer name.
View settings
msh> devicename
Printer name configuration
msh> devicename name “string”
• Enter a printer name using up to 31 alphanumeric characters.
• Set single names for each printer.
Printer name initialization
msh> device name clearname
Reset the printer name to its default.
dhcp
Remote Maintenance by telnet
Use the “dhcp” command to configure DHCP set-
tings.
View settings
The following command displays the current DHCP settings.
msh> dhcp
Configuration
You can configure DHCP.
msh> dhcp “interface_name” {on|off}
• Click {on} to enable DHCP. Click {off} to disable DHCP.
• If the DNS server address and domain name are obtained from DHCP, be sure to click {on}.
• wlan can be specified only when the wireless LAN interface unit is installed.
143
Interface name
Interface configured
ether
Ethernet interface