Parr Instrument 6100 - Manual (Page 37)

Menu Operating Instructions
6100 A
w w w . p a r r i n s t . c o m 35
Program Information and Control Menu
Date & Time: Accesses a sub-menu to set the cur-
rent date and time.
Date: Displays current date and accesses
sub-menu on which date is set in (YY/MM/DD)
format.
Time: Displays current time and accesses sub-
menu on which time is set in (HH:MM) format.
Time Zone: Displays the selected time zone
in relation to Greenwich Mean Time. Pressing
this key will step through the time zones and
automatically adjust the time setting.
Volume Level Adjust: Opens a window with a slide
adjustment to set the volume of the key clicks and
alarms of the calorimeter. Default is 85%.
Software and Hardware Info: This screen displays
important information such as the main software
version, I/O board hardware information, CPU type,
IO firmware revision, and Controller IP address.
Settings Protect: Provides protection for the pro-
gram options and settings on the menus. If this is
turned ON, the user will be warned that enumera-
tion keys are locked when a key is pressed. Enumer-
ation Keys either toggle a value (ON/OFF) or select
from a predefined list. This feature is used primarily
to protect the instrument settings from accidental
changes if one were to inadvertently touch or bump
up against the touch screen.
User/Factory Settings: This key leads to a sub-
menu that allows the user to save or recall user
defined instrument settings. Additionally, factory
pre installed settings supporting different bombs or
special operating modes can also be recalled.
User/Factory Settings
User Setup ID: Used to enter a unique identi-
fier for recalling user settings.
Reload Factory Default Settings: Used to erase
all of the settings and restore the factory de-
fault settings.
Reload User Default Settings: Used to restore
the last saved user’s setup should the program
in the instrument be corrupted for any reason.
Save User Default Settings: Used to record the
setup to the memory once the user has config-
ured the instrument to their operating require-
ments.
Compare Settings With Factory Defaults: This
button will bring up a screen that will show the
differences in the current settings of the calo-
rimeter with the factory defaults.
Feature Key: Unique Feature Keys obtained from
Parr allow the user to access capabilities on the
instrument such as bar code interfacing or remote
operation of the calorimeter, or Samba Server.
Bomb Type Select: This key toggles through the
different bomb models available for the calorimeter.
When the user chooses a bomb, the instrument
must be re-booted to load the correct version of the
software.