Parr Instrument 6100 - Manual (Page 29)

Reporting Instructions
6100 7
w w w . p a r r i n s t . c o m 27
The displayed files can be sorted by sample ID num-
ber, by type, by status or by date of test by simply
touching the appropriate column.
Individual files can be chosen by highlighting them
using the up and down arrow keys to move the
cursor. Press the SELECT key to actually enter the
selection. Once selected the highlight will turn
from dark blue to light blue. A series of tests can be
selected by scrolling through the list and selecting
individual files.
The double up and down keys will jump the cursor
to the top or bottom of the current display.
If a range of tests is to be selected, select the first
test in the series, scroll the selection bar to the last
test in the series and press EXTEND SEL to select
the series.
The DESEL ALL key is used to cancel the current
selection of files.
To bring the selected report or series of reports to
the display, press the DISPLAY key. To send the re-
ports to the printer press the PRINT key.
The EDIT key brings up a sub-menu which enables
the operator to edit any of the data in the report or
add thermochemical corrections to convert prelimi-
nary reports to final reports. Final reports can only
be edited if EDIT FINAL reports on the reporting
control page is turned on.
Net Heat of Combustion
To have the Net Heat of Combustion print as part
of preliminary and final reports, go to the Thermo-
chemical Corrections Page, Net Heat/Dry Factors,
and turn ON Calculate Net Heat of Combustion. Dur-
ing the reporting process, the controller will prompt
for the hydrogen (H) value.