Parr Instrument 6300 - Manual (Page 65)

M
ENU
O
PERATING
I
NSTRUCTIONS
6300
A
w w w . p a r r i n s t . c o m 65
Moisture as Received Entry Mode:
This key steps through the options for entering the
moisture as received correction value either manually or
through the touch screen or automatically through the
balance (USB) port.
Auto Preweigh ID Controls:
Accesses sub-menu, used to automatically assign
Sample ID numbers when a series of samples are pre
weighed ahead of the time they are actually tested.
Automatic Preweigh ID. • ON/OFF toggle for this
feature.
Automatic Preweigh ID Prefix. • An entry here will
be used as a prefix for all pre-weigh sample IDs.
Next Automatic Preweigh ID Number. • Shows the
next Sample ID which will be assigned and is
used to enter the beginning Sample ID of any
series
Automatic Preweigh ID Increment. • Establishes the
increment between samples.
R
EPORTING
C
ONTROLS
M
ENU
Report Width:
Toggle this key to set the column width of the printer
to either 40 or 80 columns. Select 40 when the 1758
Printer is used.
Automatic Reporting:
Toggles the automatic reporting ON/OFF. When ON,
preliminary reports will be generated at the conclusion
of the test and final reports will be generated as soon
as all of the thermochemical corrections are available.
When OFF, reports will only be generated by selecting
the REPORT key.
Automatic Report Destination:
Toggles to direct the reports to the Printer or the screen
display.
Individual Printed Reports:
When set to ON, will generate header information for
each report printed. In the OFF position, only one
header will be printed for a series of tests.
Edit Final Reports:
When set to ON, enables the user to revise sample
weight and thermochemical corrections of finalized
reports from the report menu.
Recalculate Final Reports:
When set to ON, causes a recalculation of stored final
reports using calibration data and menu settings cur-
rently in the Calorimeter.