Parr Instrument 6300 - Manual (Page 53)

M
ENU
O
PERATING
I
NSTRUCTIONS
6300
A
w w w . p a r r i n s t . c o m 53
A
PPENDIX
A
M
ENU
O
PERATING
I
NSTRUCTIONS
The settings and controls are organized into nine main
sections or pages which comprise the Main Menu.
This appendix describes all pages of the menu-based
operating system of the 6300 Calorimeter.
Note:
Keys which make global changes to the setup of the
calorimeter contain a YES or NO response to make
certain that the user wishes to proceed. This two step entry
is intended to prevent inadvertent global program changes.
M
AIN
M
ENU
Escape Key:
Selecting the ESCAPE key on any menu will return you
to the menu one level up.
Main Menu Key:
Selecting the MAIN MENU key on any menu will re-
turn you to the screen pictured on the right of this page.
Start Key:
Press the START key to begin any Determination or
Standardization run.
Report:
Press the REPORT key to begin the reporting process.
Help:
Press the HELP key on any screen to display the expla-
nation text for that screen.
Abort:
This key appears in the START key location while a test
or pretest is running. Pressing this key will abort the test
or pretest in progress.
:
This key appears in the Escape key location when the
main menu is displayed. This key is used to shut down
the calorimeter program before turning off the power.
C
ALORIMETER
O
PERATION
M
ENU
The calorimeter will normally be operated from the
Calorimeter Operating Page, although tests can always
be started from any menu page.
Operating Mode:
Sets the operating mode by toggling between Standard-
ization (for instrument calibration) and Determination
(for test runs).
Temperature Graph:
Press this key to display a real-time plot of the bucket
and/or jacket temperature on the Temperature vs. Time
Plot screen.
Bomb/EE:
Used to identify the bomb presently installed in the
Calorimeter and its EE value.