Parr Instrument 6300 - Manual (Page 63)

M
ENU
O
PERATING
I
NSTRUCTIONS
6300
A
w w w . p a r r i n s t . c o m 63
N
ET
H
EAT
/D
RY
H
EAT
F
ACTORS
Fixed Hydrogen:
Press the LEFT side to toggle this setting On/Off.
Press the RIGHT side to display the Fixed Hydrogen
numeric dialog box and change its value.
Fixed Oxygen:
ON/OFF and value entry.
Fixed Nitrogen:
ON/OFF and value entry.
Calculate Net Heat of Combustion:
ON/OFF. Turn On to have the calorimeter calculate the
net heat of combustion.
Fixed Moisture as Determined:
Press the LEFT side to toggle ON or OFF whether to
use the entered moisture correction. Press the RIGHT
side to access the Fixed Moisture as Determined numer-
ic dialog box and set the value. Units are weight %.
Fixed Moisture as Received:
Press the LEFT side to toggle ON or OFF whether to
use the entered moisture correction. Press the RIGHT
side to access the Fixed Moisture as Received numeric
dialog box and set the value. Units are weight %.
Dry Calculation:
Toggles the dry calculation ON or OFF.
D
ATA
E
NTRY
C
ONTROLS
M
ENU
Prompt for Bomb ID:
Toggles ON or OFF. In the ON position the controller
will prompt for a Bomb ID (1-4) when a test is started.
Weight Entry Mode:
This key steps through the options for entering sample
weights either manually through the touch screen, bal-
ance (USB) port or through the network.
Acid Entry Mode:
This key steps through the options for entering acid cor-
rection value either manually through the touch screen
or automatically through the balance (USB) port.