Martin Christ Alpha 1-2 LDplus - Manual (Page 59)

Freeze-dryer Alpha 1-2 LDplus
8 Maintenance and service
Version 11/2006, Rev. 2.0 of 02/12/2014 • sb
59
Translation of the original operating manual
8.1.3 Exhaust filter (oil mist separator)
NOTE
Please refer to the separate operating manual of the vacuum pump and
the exhaust filter!
The oil mist that is emitted by the vacuum pump in quantities that depend
on the working pressure must be led to the outside or to an exhaust hood
or similar. If this is not possible, the pump must be equipped with an
exhaust filter (oil mist separator).
• Observe the liquid level in the collecting vessel of the filter.
• Remove the condensate in time (please refer to the information
provided by the manufacturer in the separate operating manual).
Pos: 180 /01 0 Univ ersal mod ule/Seit enwec hsel @ 0\m od_ 120 211 624 4312 _0. docx @ 10 5 @ @ 1 Pos: 181 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 80 Wa rtun g u nd In stan dhalt ung/ 080 -00 10- 004 0 Vak uum mess sond e @ 25\ mod _14 0498 410 561 0_6 8.do cx @ 1 844 33 @ 3 @ 1
8.1.4 Vacuum sensor
NOTE
Please refer to the separate operating manual of the vacuum sensor!
The vacuum sensor has only a limited service life. Especially carbon-
containing substances, e.g. alcoholic compounds, reduce the service life
extremely.
• The vacuum sensor is maintenance-free.
• Remove any soiling on the outside with a cloth.
Pos: 182 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1
Pos: 183 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 80 Wa rtun g u nd In stan dhalt ung/ 080 -00 10- 005 0 Zub ehö r @ 25\ mod_ 140 498 410 669 3_6 8.doc x @ 1 844 47 @ 3 @ 1