Martin Christ Alpha 1-2 LDplus User Manual
Page 48
Freeze-dryer Alpha 1-2 LDplus
6 Operation
48
Version 11/2006, Rev. 2.0 of 02/12/2014 • sb
Translation of the original operating manual
Service menu
Fig. 39: Service menu
LDplus configuration
Here, the following accessory components (options) can be configured:
• Vacuum sensor
• Vacuum control system
NOTE
• Installed options must be activated with "yes".
• Options that are not installed must be deactivated with "no".
Load default settings
This menu item is used to reset all of the set values and parameters to the
delivery state of the freeze-dryer. The system will issue a corresponding
enquiry prior to performing this step.
Extended service menu
The extended service menu is reserved for service technicians. This area is
protected by a password and is not accessible to the user.
Pos: 133 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1
Pos: 134 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 60 Bet rieb/ LDplus/ 060 -00 50- 003 0-0 050 T uto rial @ 31\ mod _140 843 527 958 6_6 8.doc x @ 2 096 90 @ 4 @ 1
6.5.3.5 Tutorial
The tutorial provides information concerning the most important functions of
the LDplus control system.
The tutorial is available in German, English, and French.
Fig. 40: Tutorial
• Select the "Tutorial" function in the main menu.
• Browse the tutorial by way of the up/down keys.
• Click the left function key repeatedly in order to exit the tutorial.
Pos: 135 /01 0 Univ ersal mod ule/Seit enwec hsel @ 0\m od_ 120 211 624 4312 _0. docx @ 10 5 @ @ 1