Martin Christ Alpha 1-2 LDplus - Manual (Page 45)

Freeze-dryer Alpha 1-2 LDplus
6 Operation
Version 11/2006, Rev. 2.0 of 02/12/2014 • sb
45
Translation of the original operating manual
Option: Electrical lifting hoist
The freeze-dryer can be retrofitted with an electrical lifting hoist that
facilitates the attachment and removal of drying chambers.
The freeze-dryer must be in the standby mode and completely aerated.
NOTE
The drying chamber cannot be moved in the "Main drying" and "Final
drying" phases.
• Select the function "Lifting hoist" under "Special functions" in the main
menu (see above).
• Move the drying chamber by way of the up/down keys.
Fig. 33: Operation of the electrical lifting hoist
• After the completion of the process, exit the menu via the left function
key "back".
Pos: 129 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1
Pos: 130 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 60 Bet rieb/ LDplus/ 060 -00 50- 003 0-0 030 Proz ess- und Anlag en-I nfo rma tione n @ 31\ mod_ 140 835 250 386 7_6 8.docx @ 2 096 34 @ 4 @ 1
6.5.3.3 Process and equipment information
The menu "Process & equipment info" provides the user with information
concerning error, process, and system messages.
In the event of a message, a sound signal will be issued, the symbol " "
will appear on the status line, and the process and equipment information
window will be displayed. If the user is currently in a menu, the window will
not be displayed until the user exits the main menu.
1 Message
2 Status of the
information
3 Number of active
messages
4 Function key "exit
menu"
5 Function key
"acknowledge
message"
Fig. 34: Structure of the "Process & equipment info" menu
Regardless of the presence of a message, the menu can be activated at all
times in order to view any messages that are present.
• Select the "Process & equipment info" function in the main menu.
NOTE
The error messages are listed in detail under chapter 7 - "Malfunctions and
error correction".