Using quicktools – EXFO IQS-1500 Power Meters for IQS-500/600 User Manual
Page 94

Monitoring Power Meter Modules
86
IQS-1100/IQS-1500
Using QuickTools
Using QuickTools
With QuickTools, you can fine-tune your module directly, while keeping an
eye on your entire test setup.
Note: You can only access QuickTools if the module’s monitor window is selected
from the Monitors function tab and is currently active.
To start QuickTools:
1. From the Monitors function tab, elect the monitor window of the
module you wish to control.
2. Using the arrow button in the upper left corner, select QuickTools.
The corresponding monitor window flashes when QuickTools is
activated.
Note: If you want to open the actual application for your module rather than
QuickTools, click Show Controller.
IQS-1100
IQS-1500
This manual is related to the following products: