EXFO IQS-1500 Power Meters for IQS-500/600 - Manual (Page 134)

SCPI Command Reference
126 IQS-1100/IQS-1500
Product-Specific Commands—Description
:SENSe[1..n]:AVERage[:STATe]
Description This command turns the averaging ON or OFF.
Syntax :SENSe[1..n]:AVERage[:STATe]
State>
Parameter(s) AverageState:
The program data syntax for is
defined as a element.
The special forms ON and OFF
are accepted on input for increased readability.
ON corresponds to 1 and OFF corresponds to 0.
State of averaging:
0 or OFF -Disables Averaging
1 or ON -Enables Averaging
Example(s) SENS:AVER:STAT ON
See Also SENSe:AVERage:STATe?