EXFO IQS-1500 Power Meters for IQS-500/600 - Manual (Page 30)

Setting Up Your Power Meters
22 IQS-1100/IQS-1500
Managing Wavelength Lists
Managing Wavelength Lists
The wavelengths you want to use with your IQS-1100/IQS-1500 must be
entered in the Wavelength list. Please refer to the Certificate of
Compliance supplied with your power meter for information on the
wavelength range.
To add a wavelength to the list:
1. From the Settings function tab, select the Lists tab.
In the New Value list, enter the wavelength value to be added.
2. Click to confirm the new wavelength.
Note: A warning message is displayed if the new wavelength is not within the
power meter’s wavelength range.
To delete a wavelength from the list:
1. From the Settings function tab, click the List tab.
2. From, the Wavelength list, select the wavelength to be deleted.
3. Click to confirm the operation.
Note: It is not possible to delete a wavelength that is currently being used.